|
|
Manufactured Parts
|
Welcome
to our in-house parts section. We will use this page to display all
of the parts that are made in our shop. We will update this page with
some of the many new parts we will be introducing and the parts that
are already available. Dealers may go Here to find out about selling
Scott's products in your store.
 Along
with our famous front end systems we carry parts that are designed
and made in house at our machine shop faciclity. We coninue
to come up with new billet parts for hotrods and modern cars
and trucks. Some of the new products include: billet rod ends,
stainless a-arms, fully adjustable drop column kits, drop column
rings, air bag setups, four bar kits... and much more. We will
try to come up with new parts as much as time permits. For more
on our front ends go here otherwise
coninue down this page for a look at our new parts. |
 Scott's
Four Bar is made of 1-1/8" tubing 1/4" wall. It comes with billet
stainless rod ends with a left hand threading and right hand
threading for easy adjustments without removing any bolts. You
have the option of Shockwave, airbag or coil-over.
Scott's Four Bars starting at $1,095.00 |
Our new drop column is the best around!
Are you fed up with not being able to adjust your column drop--Well
here's the answer-- Scott's has engineered a column drop that
is fully adjustable, so no more need for old knee banging
column kits, our drop column is all you need! Diameter drop
comes in 1-3/4", 2" or 2-1/4" and drops from 1-1/2" to 6".
These column drops are the only fully CNC machined out of
304 SS on the market!
$120.00 Column Drop with Legs
$80.00 Column Drop Only
$10.00 Polished Column Drop Only)
 You
can also grab one of our Column floor mounts to finish off
the column. This is the smallest floor mount out today, featuring
a 15 Degree with virtually nothing showing but a small billet
ring. This is a great way to get rid of that unsightly floor
mount sitting in your favorite showcar. These come in 1-3/4",
2" or 2-1/4" diameters. These floor mounts are also only fully
CNC machined out of 304 SS on the market!
$89.00 Floor Mount
$99.00 Polished Floor Mount
|
| |
If you have an exsisting Mustang II front
end then these a-arms are for you. This is the only a-arm engineered
and built today to properly align the Mustang II front ends.
Using the billet stainless rod-ends for more adjustability these
a-arms will properly align the camber and castor for less tire
wear and more drivability. A-arms can be ordered in steel or
polished stainless steel and can be set up for airbag, Shockwave
or coil-over.
Starting At $695.00 (set of four) |
- A-Arms For Camaro, Nova, Pontiac
- Set up for a coil-over narrows your track 1 1/2 per side
- Able to adjust your caster and camber more
- 100% tig wedled
Price: $1,099.00
|
|
|
|
