Why is Scott’s Hotrods Different?  

Scott’s builds chassis specific to each and every application.  We build the MOST COMPLETE CHASSIS available on the market.  That means our chassis can come with a Fuel Tank, In-Tank pump, Fuel Lines, Brake Lines, Engine & Transmission Mounts, Disc Brakes, Sway Bars and more!  Scott’s Hotrods ‘n Customs IS Quality, Engineering & Workmanship. 100% TIG Welded, 100% American Made, 100% Bad Ass.

Scott’s Hotrods manufactures chassis for ANY year/make/model vehicle.  Each and every chassis is Built-To-Order per the vehicle and customer specs.  If you have an off-the-wall project that requires out of the ordinary engineering the priced is set accordingly.  All chassis require a 50% Deposit at the time the order is placed.  The balance will be collected as the chassis is completed.

Scott’s Custom Packard Chassis – From $10,500

SCOTT’S CHASSIS FEATURES  Staring at $10,500

  • 100% TIG Welded 2”x4”x.120-wall tube frame rails
  • 1-piece 2”x4”x3/16”-wall tube IFS Crossmember
  • Chassis Crossmember
  • Tubular Upper & Lower A-Arms, 1-1/8”x1/4”-wall DOM
  • Stainless Steel CNC Machined Fully Adjustable Upper A-Arm Rod Ends
  • Oversized Serviceable Press-In Ball Joints
  • Aldan American Single-Adjustable Coilovers or Airbags & Shocks
  • Built-in Anti-Dive
  • Manual Steering Rack & Pinion
  • Standard or Drop Forged Steel Spindles
  • Moser Ford 9” Housing & 31-spline axles, Fill & Drain Plug
  • 1”-1/8”x1/4”-wall DOM tubing bars (adjustable RH- & LH-Thread)
  • Stainless Steel CNC Machined Rod Ends – RH- & LH-Thread
  • 1”-1/8”x1/4”-wall DOM tubing Panhard bar (adjustable RH- & LH-Thread)
  • FK Bearing Heim Joints – RH- & LH-Thread
  • 4-Bar Rear-End Housing Brackets
  • 4-Bar Frame Brackets
  • Body Mounts
  • All Grade-8 hardware
  • LIFETIME GUARANTEE

OPTIONS

  • Custom Track Width & Ride Height
  • Motor Mounts $150+
  • Power Rack & Pinion Steering $250
  • Right Hand Drive Rack & Pinion $699
  • Power Steering Steel Braided Line Kit $140
  • Drop-Out Transmission Crossmember $289
  • Wilwood Mustang II ProSpindles $200
  • 5 on 5, 5 on 5.5, and 6 lug bolt pattern $300
  • Standard 1” Solid Sway Bar $289
  • Front Torsion Spline Sway Bar $625
  • Rear Torsion Spline Sway Bar $625
  • Scott’s Watts Link $995
  • Wilwood 11”, 12”, 13”, 14” Complete Brake Kits $775+
  • Steel Braided Brake Flex Lines w/-3AN fittings $148
  • Moser 3rd Member with POSI and choice of gears $1,500
  • Handcrafted Aluminum Baffled Fuel Tank w/Sending Unit $499 Carb or $995 EFI
  • Stainless Steel Fuel Lines Plumbed $320 Carb or $610 EFI
  • Steel Braided Soft Line (Tank to Hard Line) $120 Carb or $220 EFI
  • Stainless Steel Brake Lines Plumbed $700
  • Parking Brake Cables $120
  • Powder Coating & Reassembly $3,000

 

COILOVER OPTIONS

  • Aldan American Single-Adjustable (Rebound) (included)
  • Aldan American Double-Adjustable (Rebound/Compression) $1,000
  • RideTech Single-Adjustable (Rebound) $1,300
  • RideTech Triple Adjustable (Rebound/High & Low Compression) $3,300

 

SUPERSLAM SHOCK OPTIONS

  • RideTech HQ Single-Adjustable Shocks (Rebound) $660

*GM Performance Parts LS Engine Oil Pan 12628771

A qualified professional mechanic or fabricator with the technical understanding of product function and installation procedures must install all Scott’s Hotrods products.

We stand behind ALL of the parts we manufacture.  Other parts that we do not manufacture such as brakes, steering racks, ball joints, brake flex lines, power steering lines, etc carry their own manufacturers warranties.  We are not responsible for these items outside of their original warranty.

All of Scott’s Hotrods manufactured parts are guaranteed to be free of defects in materials & workmanship for the lifetime of the part. Scott’s Hotrods warranty is non-transferable.

GM Performance Parts LS Engine Oil Pan 12628771