Why is Scott’s Hotrods Different?  Because This Isn’t Your Daddy’s Mustang II!

At Scott’s Hotrods we believe, wholeheartedly, that the key to enjoying a hotrod lies in the chassis and suspension underneath it and in making the decision to never settle for anything less than perfection.

Every Scott’s Hotrods IFS comes with a limited lifetime guarantee because of a refusal to use inferior materials. 1-1/8”x1/4” wall DOM seamless tubing is used to make ALL of Scott’s Hotrods A-arms, both upper and lower. Each and every one is CNC machined to provide the highest level of quality and durability. 2”x4”x3/16” wall tubing is used for every crossmember and are all 100% TIG welded for rigidity and strength.

The concept of a “one-off” suspension built for each and every customer was a difficult one to grasp because of the long standing use and availability of Mustang II’s in the hotrod and street rod community. Fortunately for us, as more and more Scott’s Hotrods IFS systems began hitting the street, the concept was realized.

Scott’s Hotrods knows that in order for a suspension to function properly, it must have the correct geometry. To achieve this, it must have all of its pivot points in the location they were designed to be in. The moment you change a single one of those pivot points, your suspension will cease to function as it was designed, which is the common mistake of those installing Mustang II’s in their cars.

When you order a Scott’s Hotrods suspension we start from scratch. We take all of your information like the type of vehicle, motor, track width, ride height and work to build you something that will net you the correct handling characteristics you are looking for. Your a-arm lengths, cross-member pivot points and entire cross-member will be unique to your vehicle. This will insure that your suspension will work exactly as advertised, guaranteed!

All of Scott’s Hotrods manufactured parts are guaranteed to be free of from manufacturers defects for the lifetime of the part. Warranty is non-transferable.

All of Scott’s Hotrods Chassis are built with the same quality that our front ends are 100% TIG welded. They can all be tailored to your needs as well. All of our chassis use a unique 8 point X member for superior strength and handling. We build chassis for all projects, any year make or model and include a lifetime warranty on craftsmanship.

  • Fully boxed frame rails
  • SBC/BBC motor mounts
  • Removable transmission mount
  • Tubular 8-point X-member
  • Complete Scott’s IFS
  • Scott’s 4-link
  • Ford 9” housing
  • Body mount bolt holes or nuts
  • Running board bolt holes or nuts (if applicable)

From $10,900.00

  • Wilwood brake upgrades front and rear
  • Brake lines
  • Fuel lines (run internally)
  • Fuel tank
  • Axles and center section
  • Custom dimensions like pro-street or low riding applications

When you order a Scott’s Hotrods suspension we start from scratch. We take all of your information like the type of vehicle, motor, track width, ride height and work to build you something that will net you the correct handling characteristics you are looking for. Your a-arm lengths, cross-member pivot points and entire cross-member will be unique to your vehicle. This will insure that your suspension will work exactly as advertised, guaranteed!

A qualified professional mechanic or fabricator with the technical understanding of product function and installation procedures must install all Scott’s Hotrods products.

All of Scott’s Hotrods manufactured parts are guaranteed to be free of from manufacturers defects for the lifetime of the part. Warranty is non-transferable.

This ISN'T Your Daddy's Mustang II!

Scott’s Hotrod IFS Suspension

Invalid Displayed Gallery